VALBY® Rotators GET WORK DONE!
R6 Rotator Features:
- The R6 is a hanging 'flange' rotator for use on mini-excavators, medium truck loaders, knuckleboom loaders and backhoes.
- The built-in flange gives the rotator a flat bottom that can attach directly to a flat-topped grapple without requiring a separate flange. This design feature also allows the R6 to pass the grapple hydraulics out through ports on the bottom, or out the sides. The R6 ships with head plugs that fit both the bottom and side ports, allowing the operator to use whichever ports work best for the application.
- Two hydraulic circuits are required to operate the rotation and clamping. However, a diverter valve is available if your equipment only has one circuit.
- There are two ways to attach this rotator: 1) Pin directly to the boom with an "H-style" full hanger; or 2) Hang from a flat plate coupler designed for your excavator quick attach system. Click here to see an example of a hanging grapple system.
- Seal kits and replacement parts are in stock.
- The R6 rotator can be used to replace the Indexator GV 6 RF, as the bolt dimensions are the same.
|
|
Technical Specs:
|
|
Rotation
|
|
Unlimited in Either Direction
|
|
Max Load
|
|
13,200 lbs
|
|
Max Working Pressure
|
|
3,626 psi
|
|
Torque
|
|
1,106 lb ft
|
|
Weight
|
|
99 lbs
|
|
Pin Size
|
|
1.38" (35 mm)
|
|
|
Measurements:
|
|
A) Inside Width of Ears
|
|
3.17" (80.5 mm)
|
|
B) Upper Pinhole
|
|
1.38" (35 mm)
|
|
C) Axle Diameter
|
|
n/a |
|
D) Lower Pinhole
|
|
n/a
|
|
E) Height
|
|
11.34" (288 mm)
|
|
Thread
|
|
JIC ¾" 16 |
|
Distance between Bolts
|
|
6.81" (173 mm)
|
|
Bolt Diameter
|
|
17 mm
|
|
View Other Models Hanging Rotator Main Page |
|
R2 / R3 / R45 / R45F / R55 / R6 / GV12S / GV14S / GV17US203
|
|