VALBY® Rotators GET WORK DONE!
R3 Rotator Features:
- The R3 is a hanging 'axle' rotator for use on small mini-excavators, knuckleboom loaders and backhoes.
- Two hydraulic circuits are required to operate the rotation and clamping. However, a diverter valve is available if your equipment only has one circuit.
- There are two ways to attach this rotator: 1) Pin directly to the boom with an "H-style" full hanger; or 2) Hang from a flat plate coupler designed for your excavator quick attach system. Click here to see an example of a hanging grapple system.
- Seal kits and replacement parts are in stock.
- The hook-up dimensions of the R3 are the same as Indexator GV 3 and Fin FR 7 rotators.
|
|
Technical Specs:
|
|
Rotation
|
|
Unlimited in Either Direction
|
|
Max Load
|
|
6,600 lbs
|
|
Max Working Pressure
|
|
3,626 psi
|
|
Torque
|
|
516 lb ft
|
|
Weight
|
|
36.3 lbs
|
|
Pin Size
|
|
1" (25 mm)
|
|
|
Measurements:
|
|
A) Width of Block
|
|
2.36" (60 mm)
|
|
B) Upper Pinhole
|
|
0.98" (25 mm)
|
|
C) Axle Diameter
|
|
1.95" (49.5 mm)
|
|
D) Lower Pinhole
|
|
0.98" (25 mm)
|
|
E) Height (pin to pin) |
|
9.92" (252 mm)
|
|
Thread
|
|
JIC ¾" 16 |
|
View Other Models Hanging Rotator Main Page |
|
R2 / R3 / R45 / R45F / R55 / R6 / GV12S / GV14S / GV17US203
|
|