TG28UG Print E-mail
TG28SUniversal grab for sorting and handling recycling materials, as well as forestry applications. The TG28UG-11* grapple has six claws on one side and five on the other.  It is a bypass design, so the material is always held tighly and securely. This grapple is suited for use on large excavators and log loaders.  It can be mounted with either a hanging rotator or a rigid rotator.

The main features are:
  • The TG28UG-11 is manufactured using Hardox 400 HB steel. Hardox is a very hard and durable steel used by quality manufacturers for grapples that require exceptional strength.
  • Large, powerful cylinders with heavy pistons.
  • A belly plate to protect the cylinder from underneath.
  • The individual claws are shaped like fingers, enabling the grapple to penetrate into piles of brush. However, sorting grapples are also adept at grabbing logs, scrap, or other materials.
  • An excellent geometry. The form of the claws enables a smooth roll-in and roll-out of the load, enabling a controlled grab or release. See the Motion Drawing below.
TG28UG/11 Motion Drawing

Technical Specs:
Max Opening (A)

Height Open (B)

Height Closed (C)
Min Opening (D)

Width of Jaw (E)
Max Lifting Capacity
11,023 lbs
Grip Force
3,732 lb ft
Working Pressure
4,351 psi
Jaw Material
Number of Claws 11
970 lbs
Excavator Max Operating Weight (Hanging - Rigid) 33,069 lbs - 22,046 lbs
Recommended Rotator (Hanging - Rigid) GV17US203* - RMR12*
Recommended Oil Flow 16 gpm
View Other Models
Sorting Grapples Main Page
TG12UG-7 / TG22UG-9 / TG28UG-11 / TG36UG-13 / GX28-50 / GX36-50 / GX55-50

*Available by Special Order only.

Click to Request Info or Call 888-589-6160

A Northeast Implement Company
Northeast Implement BBB Business Review

  • Click for Owner Manauls
  • FarmiWinch Features

Visit Our Other Great Brands

Farmi Winch La Magdalena PTO Shafts Naarva Grip Felling Heads Intermercato Rotators Farmi  Woodchippers